To Get a FREE Qoute on a Product
Please click here or contact us
For a Quote on Our Products click here.
BARRIER NETTING INSTALLATION INSTRUCTIONS
STRUCTURE: For proper net installation, we recommend
a cable support structure be installed on 10’ centerlines so
the net will be supported in the length and width direction.
This is important to minimize wind damage which would
shorten the life of the netting.
Remove the barrier netting from the shipping package and
extend it the length of the area to be covered.
NOTE: When the barrier netting is in the bundled
configuration it is about 30% longer than when fully
opened in the width and length directions. A 100’ long
net will be 130’ when bundled. Opening the net to its
full width will reduce the length to 100’.
Starting at one end, open about 5’ of the net and make
temporary connections to the support structure. Continue
the process for the full length of the net. Realign the net in
both width and length directions so that each mesh
throughout the net forms a circular pattern of 1” diameter
opening in length and width directions. When complete,
permanently attach the net to the support structures
approximately every foot.